How To Download and Install Official Stock ROM on Alcatel Pop 4S

Share:
Stock Rom is an official firmware that is preinstalled on every new device. Most of the Android users don’t stick to single Rom/firmware always. Most people often change firmware, try new custom ROMs or flash kernels to improve overall device performance. So if you are using Custom ROM on Alcatel Pop 4S and searching for a perfect guide to flash stock firmware on Alcatel Pop 4S then you are at the right place. We will guide you on how to download and install Alcatel Pop 4S Stock firmware. Alcatel Pop 4S Android smartphone was launched in February 2016. The phone comes with a 5.50-inch HD display with a screen resolution of 1080x1920 pixels. The Alcatel Pop 4S is powered by 1GHz octa-core processor along with 2GB of RAM & 16GB of internal storage that can be expanded up to 64GB via a microSD card. As far as the cameras are concerned, the Alcatel Pop 4S packs a 13-megapixel primary camera on the rear and a 5-megapixel front-facing camera.

Custom ROM is modified version of Operating System such as LineageOS, Resurrection Remix, etc. There are many advantages of using custom ROM on your Alcatel Pop 4S Device but along with it, there might be some disadvantages too. There is some issue that is not going away by clearing cache or even by a factory reset. Sometimes, the partition table of the Alcatel Pop 4S device itself gets corrupted resulting in a semi-hard or hard-brick in the worst scenario. Most common reason for flashing a stock firmware is to unroot your device to get back to the factory settings in order to receive OTA updates.


In this post, we will provide you a detailed guide, which will not only include all the basic flashing details, but also a step-by-step instruction to easily flash Stock Rom on your Alcatel Pop 4S in few minutes. You do not need any specialization to do this procedure. We give you all the necessary files in Flash Stock Rom on Alcatel Pop 4S. Before we get started with the step-by-step tutorial, make sure that you have the following tools ready and in place to begin.


Advantage Of Stock ROM

      The stock firmware operating system is the result of many research and testing done by the device manufacturer and/or mobile service carrier. The benefits of updating your Alcatel Pop 4S device include.
      • You can unbrick your Alcatel Pop 4S Device if it’s boot looping and is stuck at the logo during a reboot.
      • A set of new features with the latest updates that you might be missing out on.
      • Flashing Stock ROM can solve several software issues. 
      • Essential security patches to keep your Alcatel Pop 4S device safe and secure.
      • Improved hardware and software performance along with optimizations.
      • You can remove any custom recovery like TWRP, Philz, and CWM, if installed, on your Alcatel Pop 4S.
      • Latest updates are pushed automatically to Alcatel Pop 4S by the device manufacturer.

      Pre-requirements:-

      • Download the correct stock firmware. You can check your model number by navigating to [To check your device model: Go to Settings >> About phone >> model number].
      • This Stock Firmware has to be installed on the Alcatel Pop 4S only;  Do not try this on any other device or variant. if tried on another smartphone, your device might get bricked.
      • Enable the USB Debugging & OEM unlock of Alcatel Pop 4S. To allow USB debugging Navigate to Setting >> About Phone >> Now Tap on Build Number 7 times until you see a message on the screen like ” You Are Now A Developer.
      • You need a Laptop or PC & USB cable. 
      • Your Alcatel Pop 4S Device battery should be greater than 50% to perform the flashing process.
      • Download all the required files from the below download link and also Install appropriate USB Driver for your device.

      Download Links:-

      Stock Rom for Alcatel Pop 4SDownload
      SP Flash Tool Download 
      Install Vcom DriverDownload


      How To Install Stock ROM on Alcatel Pop 4S

      This process will not only return your Alcatel Pop 4S to its original firmware, but it is also the very useful procedure if somehow you messed-up your device. you can Unbrick or Fix Bootloop using Stock Firmware.
      Thank you for reading this post to install stock ROM on Alcatel Pop 4S and stay connected to Kbloghub to continue enjoying these types of posts. If you have any questions regarding this procedure, you can comment right away. Also, you can give a call for a dead link to replace it with a new one. If you find this post helpful, please share this post on social media. It will take only a few moments and it will be quite easy and helpful for others.


      author

      About the Author

      Hello, my name is Kundan Gupta. I'm a professional tech blogger with Bachelor's degree in ECE With an experience of more than 3 years in R&D, Android development & Stock Android OS.
      Learn More →



      No comments